Contract 0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a7 1

 

Contract Overview

Balance:
0 BNB

BNB Value:
$0.00

Token:
Txn Hash Method
Block
From
To
Value [Txn Fee]
0x3aaa851830f3b89f1da6b77e1d539ab090e4a76346fbe2c665502d55e163381bSet Approval For...113056382021-09-28 10:43:171 min ago0xa995c1c992a752c2b61fae63379874b6ceab2257 IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00047526
0x574edff64334b0db8218defa4f4a1e727f1977ce22378cb2ab750e9fb12abb73Set Approval For...113055472021-09-28 10:38:216 mins ago0x7aba908027a8376324bd17e5c7785b7f88c2885e IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00023763
0x76c8fbe8e397c8abd8b3db2096b463e4d77092a55a093f32493a2ee26cc2b743Set Approval For...113049862021-09-28 10:10:1834 mins ago0x9642029e3e675c862ef38a1c951e7a56ade44b8d IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00023763
0xbe95fdd8402e874000bc9fc5970beaae92fa8d2d492011ec27704be2301f92a9Set Approval For...113049352021-09-28 10:07:3237 mins ago0x637d615d210714534a16b5bab1a66dc4c4914ca8 IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00047526
0xa68413ee2acc9e452cc262146aa36c4a05b5323ed214c59a96e64d002ab0fe1fSet Approval For...113049342021-09-28 10:07:2937 mins ago0x3968aeda7519bf00cdbe831e6d9fea55b23088af IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00023763
0xe534e95634dbfeea6c3b67b5246039669707efd594e30cbdfeb91e42ae63424fSet Approval For...113049262021-09-28 10:07:0537 mins ago0x9c6fdf9ba4df482292acc994aa370c2a743957e5 IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00023763
0x8acf2f0e7ec6b7cb5e59bc6c26a7cab2ba77cf9c47b6a51867eabcb42703edcfSet Approval For...113049032021-09-28 10:05:5639 mins ago0x215ab24cf4c5e6901e394697d15a3a8fb4e8407d IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00023763
0xf407471cf3393c5ed0c5f94b086187e7ce2c581bad18d1e364609d7367256e60Set Approval For...113048532021-09-28 10:03:2641 mins ago0xf1245d385ef3d9e8af04b0e1c7db2defb4a6f6ff IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00023763
0x2613f8945c9d01434a50293530a66f9a45c80c01290b819b664d9531974f64a1Set Approval For...113048342021-09-28 10:02:2942 mins ago0x5950ce7bcfb98b2a1d20bbb27adbc40ec89d84a7 IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00023763
0x4d0425a4ebc93fc0ae7002f02d09035826a5ec3ede54bfa972ca376934ea31dcSet Approval For...113048192021-09-28 10:01:4443 mins ago0x5f7deb42784a9b3d3adc90838d26e99ea24d0da1 IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00023763
0x6085b81f5333b0f20b92fb6f41bcae4529ce8ac9e1842a801554310e762f1642Set Approval For...113047822021-09-28 9:59:5345 mins ago0x3515482ea8d9879c7300b6bd8d22bd6824d4699f IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00023763
0xc8140f4d1d0f5f2da2b2686b9ee9271d1e9a2f5c19d7be9d3db9500c9904baa3Set Approval For...113047242021-09-28 9:56:5848 mins ago0x9c3778733abed9a20e97c5e547facbf20cdaea1d IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00047526
0x5f1726f8a213de453f135e7a04cbb06ad090ed95542917ea4d310e1c3c9ec7b8Set Approval For...113046422021-09-28 9:52:1152 mins ago0x7a880e9b0a8cb38ab3bafabf02a6616b19780526 IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00023763
0x044da4c99fa38d425bb1e607e27b21ae4b16ca3351b1aa05aad9d263f5aa9ad5Set Approval For...113043582021-09-28 9:37:361 hr 7 mins ago0x6ab7b619e11dd533a2b01c51d5d6db37829b2706 IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00023763
0xaaa4ecd417c282e732f76f2139d9f1ad7ce853b636b7fd64391f8aaf9fbfef36Set Approval For...113042302021-09-28 9:31:121 hr 13 mins ago0x0aedc8a9f7efbeb32feb5370990880cb589a808e IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.0002423826
0x64ed9bc45c4d2388c61b0520cfdac4bc21de0c56d54045ab320bd39db9a08e87Set Approval For...113040892021-09-28 9:24:091 hr 20 mins ago0x1d80a9bb0e3f53546a3854b47c74c2c329f17395 IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00023763
0x8030fb72f840a91a94476216a0eaa179f86138199a95d9d7f5dff3314c009ea6Set Approval For...113040292021-09-28 9:20:561 hr 24 mins ago0x54e800c6e8ae315a528b02c61d2721a41ce6b988 IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00047526
0x1fe17787a179419d1653e92586a1dd4ed9ed1b417535384f26969dc79a7e9b34Set Approval For...113038032021-09-28 9:09:381 hr 35 mins ago0x97fa7870ed4575187907bfeac6573c53715e656f IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00023763
0x5962a2220f8c341cd5df45bf33ce8c9cadf91a9995f020b0f04711381a347794Set Approval For...113037402021-09-28 9:06:291 hr 38 mins ago0xfa7f7175876dfb868c3fdadcb96c5ffd92dedb41 IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00023763
0xd7ace48427b945fef4f7e546b668ebd7164d1935dc1c97f19636e214a99dad32Set Approval For...113036582021-09-28 9:02:231 hr 42 mins ago0x96ba3c0778ffc0f52617a0ee7d7c40e2baf3884b IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00047526
0x7cb34348d2430cf617b4e1672d0ab7caab90ecd83ecf2efa07d8e17b78593086Set Approval For...113035552021-09-28 8:57:141 hr 47 mins ago0x3f52fb161df67c3204b3ade93a9a6b0ef6dc6b46 IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00023763
0xa72e1ca3d3743e353a8378f7406dc032afb21ddef48f0e06ec4f9c96b35a4874Set Approval For...113035422021-09-28 8:56:351 hr 48 mins ago0xf330864c2d4bc1c9d8f9d9319490eba89176794d IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00047526
0xc7ec9ca094be0d61ba0674694639fad05d6ffcb1a5fa808304cbeaf27182f3b6Set Approval For...113034662021-09-28 8:52:471 hr 52 mins ago0xa355a9bd77e9ce872598c5b7311cbfbc8fca3ec3 IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00023763
0xcdbb1ca22f13b79f7977e33fb82e8bc512b0ec61281a02a3b5bfdc3366f6cb0cSet Approval For...113034442021-09-28 8:51:411 hr 53 mins ago0x8026de932f6c675b2fe88722c427d77f71f4ce4c IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00047526
0x426f1adbf51d391b0c59d3386c8a74a139a95d883c01baff225b2a2cb268d2c0Set Approval For...113034342021-09-28 8:51:111 hr 53 mins ago0xe7b7737bdb498545bab15584238214457f34b415 IN  0xf91d6e71f6d9e6dbffe92597ce0fdd76058c49a70 BNB0.00023763
[ Download CSV Export 
Parent Txn Hash Block From To Value
Loading

Contract Source Code Verified (Similar Match)
Note: This contract matches the deployed ByteCode of the Source Code for Contract 0x970093b4167261985621e6f2dc738d2e78ce6ac2

Contract Name:
MoMoProxy

Compiler Version
v0.6.12+commit.27d51765

Optimization Enabled:
Yes with 200 runs

Other Settings:
default evmVersion, MIT license

Contract Source Code (Solidity)

/**
 *Submitted for verification at BscScan.com on 2021-04-03
*/

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.6;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
}

library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, "SafeMath: division by zero");
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0, "SafeMath: modulo by zero");
        return a % b;
    }
}

library SafeMathExt {
    function add128(uint128 a, uint128 b) internal pure returns (uint128) {
        uint128 c = a + b;
        require(c >= a, "uint128: addition overflow");

        return c;
    }

    function sub128(uint128 a, uint128 b) internal pure returns (uint128) {
        require(b <= a, "uint128: subtraction overflow");
        uint128 c = a - b;

        return c;
    }

    function add64(uint64 a, uint64 b) internal pure returns (uint64) {
        uint64 c = a + b;
        require(c >= a, "uint64: addition overflow");

        return c;
    }

    function sub64(uint64 a, uint64 b) internal pure returns (uint64) {
        require(b <= a, "uint64: subtraction overflow");
        uint64 c = a - b;

        return c;
    }

    function safe128(uint256 a) internal pure returns(uint128) {
        require(a < 0x0100000000000000000000000000000000, "uint128: number overflow");
        return uint128(a);
    }

    function safe64(uint256 a) internal pure returns(uint64) {
        require(a < 0x010000000000000000, "uint64: number overflow");
        return uint64(a);
    }

    function safe32(uint256 a) internal pure returns(uint32) {
        require(a < 0x0100000000, "uint32: number overflow");
        return uint32(a);
    }

    function safe16(uint256 a) internal pure returns(uint16) {
        require(a < 0x010000, "uint32: number overflow");
        return uint16(a);
    }
}

library Math {
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow, so we distribute
        return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
    }
}


/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() internal {
        _owner = _msgSender();
        emit OwnershipTransferred(address(0), _owner);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_msgSender() == _owner, "not owner");
        _;
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public {
        require(newOwner != address(0), "newOwner invalid");
        if (_owner != address(0)) {
            require(_msgSender() == _owner, "not owner");
        }
        
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 * From https://github.com/OpenZeppelin/openzeppelin-contracts
 */
interface IERC20 {
  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);

  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);

  /**
   * @dev Moves `amount` tokens from the caller's account to `recipient`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address recipient, uint256 amount) external returns (bool);

  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);

  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);

  /**
   * @dev Moves `amount` tokens from `sender` to `recipient` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(
    address sender,
    address recipient,
    uint256 amount
  ) external returns (bool);

  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);

  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);
}

contract ERC20 is IERC20, Context {
    using SafeMath for uint256;

    mapping (address => uint256) internal _balances;
    mapping (address => mapping (address => uint256)) internal _allowances;

    uint256 internal _totalSupply;

    /**
     * @dev Returns the name of the token.
     */
    string public name;

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    string public symbol;

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    uint8  public decimals;

    /**
     * @dev Sets the values for {_name} and {_symbol}, {_decimals}
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory _name, string memory _symbol, uint8 _decimals) public {
        name = _name;
        symbol = _symbol;
        decimals = _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() external view override returns(uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address _owner) external view override returns (uint256) {
        return _balances[_owner];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `_to` cannot be the zero address.
     * - the caller must have a balance of at least `_amount`.
     */
    function transfer(address _to, uint256 _amount) external override returns (bool) {
        _transfer(_msgSender(), _to, _amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address _owner, address _spender) external view override returns (uint256) {
        return _allowances[_owner][_spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `_spender` cannot be the zero address.
     */
    function approve(address _spender, uint256 _amount) external override returns (bool) {
        _approve(_msgSender(), _spender, _amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `_from` and `_to` cannot be the zero address.
     * - `_from` must have a balance of at least `_amount`.
     * - the caller must have allowance for `_from`'s tokens of at least
     * `_amount`.
     */
    function transferFrom(address _from, address _to, uint256 _amount) external override returns (bool) {
        require(_from != address(0) && _to != address(0));

        _approve(_from, _msgSender(), _allowances[_from][_msgSender()].sub(_amount));
        _transfer(_from, _to, _amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `_spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `_spender` cannot be the zero address.
     */
    function increaseAllowance(address _spender, uint256 _addVal) external returns (bool) {
        require(_spender != address(0), "approve to 0");

        _approve(_msgSender(), _spender, _allowances[_msgSender()][_spender].add(_addVal));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `_spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `_spender` cannot be the zero address.
     * - `_spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address _spender, uint256 _subVal) external returns (bool) {
        require(_spender != address(0), "approve to 0");

        _approve(_msgSender(), _spender, _allowances[_msgSender()][_spender].sub(_subVal));
        return true;
    }

    /**
     * @dev Moves tokens `_amount` from `_from` to `_to`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `_from` cannot be the zero address.
     * - `_to` cannot be the zero address.
     * - `_from` must have a balance of at least `_amount`.
     */
    function _transfer(address _from, address _to, uint256 _amount) internal {
        require(_from != address(0), "transfer from 0");
        require(_to != address(0), "transfer to 0");

        _balances[_from] = _balances[_from].sub(_amount);
        _balances[_to] = _balances[_to].add(_amount);
        emit Transfer(_from, _to, _amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `_spender` over the `_owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `_owner` cannot be the zero address.
     * - `_spender` cannot be the zero address.
     */
    function _approve(address _owner, address _spender, uint256 _amount) internal {
        require(_owner != address(0), "approve from 0");
        require(_spender != address(0), "approve to 0");

        _allowances[_owner][_spender] = _amount;
        emit Approval(_owner, _spender, _amount);
    }

    /** @dev Creates `_amount` tokens and assigns them to `_to`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address _to, uint256 _amount) internal {
        require(_to != address(0), "mint to 0");

        _totalSupply = _totalSupply.add(_amount);
        _balances[_to] = _balances[_to].add(_amount);
        emit Transfer(address(0), _to, _amount);
    }

    /**
     * @dev Destroys `_amount` tokens from `_from`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `_from` cannot be the zero address.
     * - `_from` must have at least `_amount` tokens.
     */
    function _burn(address _from, uint256 _amount) internal {
        require(_from != address(0), "burn from 0");

        _balances[_from] = _balances[_from].sub(_amount);
        _totalSupply = _totalSupply.sub(_amount);
        emit Transfer(_from, address(0), _amount);
    }
}


/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0), "SafeERC20: approve from non-zero to non-zero allowance");
        callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value);
        callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves.

        // A Solidity high level call has three parts:
        //  1. The target address is checked to verify it contains contract code
        //  2. The call itself is made, and success asserted
        //  3. The return value is decoded, which in turn checks the size of the returned data.
        // solhint-disable-next-line max-line-length
        require(address(token).isContract(), "SafeERC20: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = address(token).call(data);
        require(success, "SafeERC20: low-level call failed");

        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     * 
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal {
        // solhint-disable-next-line no-inline-assembly
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())

            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)

            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())

            switch result
            // delegatecall returns 0 on error.
            case 0 { revert(0, returndatasize()) }
            default { return(0, returndatasize()) }
        }
    }

    /**
     * @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal virtual view returns (address);

    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     * 
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _fallback() internal {
        _beforeFallback();
        _delegate(_implementation());
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback () payable external {
        _fallback();
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive () payable external {
        _fallback();
    }

    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     * 
     * If overriden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {
    }
}

contract UpgradeableProxy is Proxy {
    /**
     * @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.
     * 
     * If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded
     * function call, and allows initializating the storage of the proxy like a Solidity constructor.
     */
    constructor(address _logic, bytes memory _data) public payable {
        assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
        _setImplementation(_logic);
        if(_data.length > 0) {
            // solhint-disable-next-line avoid-low-level-calls
            (bool success,) = _logic.delegatecall(_data);
            require(success);
        }
    }

    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);

    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 private constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;

    /**
     * @dev Returns the current implementation address.
     */
    function _implementation() internal override view returns (address impl) {
        bytes32 slot = _IMPLEMENTATION_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            impl := sload(slot)
        }
    }

    /**
     * @dev Upgrades the proxy to a new implementation.
     * 
     * Emits an {Upgraded} event.
     */
    function _upgradeTo(address newImplementation) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }

    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        require(isContract(newImplementation), "UpgradeableProxy: new implementation is not a contract");

        bytes32 slot = _IMPLEMENTATION_SLOT;

        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(slot, newImplementation)
        }
    }

    function isContract(address account) internal view returns (bool) {
        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }
}

contract TransparentUpgradeableProxy is UpgradeableProxy {
    /**
     * @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and
     * optionally initialized with `_data` as explained in {UpgradeableProxy-constructor}.
     */
    constructor(address _logic, address _admin, bytes memory _data) public payable UpgradeableProxy(_logic, _data) {
        assert(_ADMIN_SLOT == bytes32(uint256(keccak256("eip1967.proxy.admin")) - 1));
        _setAdmin(_admin);
    }

    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);

    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 private constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;

    /**
     * @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.
     */
    modifier ifAdmin() {
        if (msg.sender == _admin()) {
            _;
        } else {
            _fallback();
        }
    }

    /**
     * @dev Returns the current admin.
     * 
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyAdmin}.
     * 
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function admin() external ifAdmin returns (address) {
        return _admin();
    }

    /**
     * @dev Returns the current implementation.
     * 
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyImplementation}.
     * 
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
     */
    function implementation() external ifAdmin returns (address) {
        return _implementation();
    }

    /**
     * @dev Changes the admin of the proxy.
     * 
     * Emits an {AdminChanged} event.
     * 
     * NOTE: Only the admin can call this function. See {ProxyAdmin-changeProxyAdmin}.
     */
    function changeAdmin(address newAdmin) external ifAdmin {
        require(newAdmin != address(0), "TransparentUpgradeableProxy: new admin is the zero address");
        emit AdminChanged(_admin(), newAdmin);
        _setAdmin(newAdmin);
    }

    /**
     * @dev Upgrade the implementation of the proxy.
     * 
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgrade}.
     */
    function upgradeTo(address newImplementation) external ifAdmin {
        _upgradeTo(newImplementation);
    }

    /**
     * @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified
     * by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the
     * proxied contract.
     * 
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgradeAndCall}.
     */
    function upgradeToAndCall(address newImplementation, bytes calldata data) external payable ifAdmin {
        _upgradeTo(newImplementation);
        // solhint-disable-next-line avoid-low-level-calls
        (bool success,) = newImplementation.delegatecall(data);
        require(success);
    }

    /**
     * @dev Returns the current admin.
     */
    function _admin() internal view returns (address adm) {
        bytes32 slot = _ADMIN_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            adm := sload(slot)
        }
    }

    /**
     * @dev Stores a new address in the EIP1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        bytes32 slot = _ADMIN_SLOT;

        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(slot, newAdmin)
        }
    }

    /**
     * @dev Makes sure the admin cannot access the fallback function. See {Proxy-_beforeFallback}.
     */
    function _beforeFallback() internal override virtual {
        require(msg.sender != _admin(), "TransparentUpgradeableProxy: admin cannot fallback to proxy target");
        super._beforeFallback();
    }
}


contract MoMoProxy is TransparentUpgradeableProxy {
    constructor(address _implementation, address _admin, bytes memory _data) public TransparentUpgradeableProxy(_implementation, _admin, _data) {
    }
}

contract MoMoSetting is Ownable {
    address public settingGuardian;

    uint256 public levelMaxV4;
    uint256 public levelMaxV5;
    uint256 public levelMaxV6;
    
    mapping (uint256 => uint256) _levelUpV4;
    mapping (uint256 => uint256) _levelUpV5;
    mapping (uint256 => uint256) _levelUpV6;


    mapping (uint256 => string) _ipfsUrisGeneral; 
    mapping (uint256 => string) _ipfsUrisSpecial;
    mapping (address => bool) _erc721Receiver;
    mapping (address => bool) _erc1155Receiver;
    bool public disableERC721ReceiveCheck;
    bool public disableERC1155ReceiveCheck;


    constructor() public {
        
    }

    function setSettingGuardian(address addr_) external onlyOwner {
        settingGuardian = addr_;
    }

    modifier onlyGuardian() {
        require(msg.sender == settingGuardian, "not writer");
        _;
    }

    function setMaxLevel(uint256 lvv4_, uint256 lvv5_, uint256 lvv6_) external onlyGuardian {
        require(lvv4_ > levelMaxV4 && lvv4_ < 256, "invalid lvv4");
        require(lvv5_ > levelMaxV5 && lvv5_ < 256, "invalid lvv5");
        require(lvv6_ > levelMaxV6 && lvv6_ < 256, "invalid lvv6");

        levelMaxV4 = lvv4_;
        levelMaxV5 = lvv5_;
        levelMaxV6 = lvv6_;
    }

    function setUri(uint256 prototype_, string memory uri_) external onlyGuardian {
        _ipfsUrisGeneral[prototype_] = uri_;
    }

    function setUriSpecial(uint256 tokenId_, string memory uri_, bool remove_) external onlyGuardian {
        if (remove_) {
            delete _ipfsUrisSpecial[tokenId_];
        } else {
            _ipfsUrisSpecial[tokenId_] = uri_;
        }
    }

    function setReceiver721(address addr_, bool v_) external onlyGuardian {
        _erc721Receiver[addr_] = v_;
    }

    function setReceiver1155(address addr_, bool v_) external onlyGuardian {
        _erc1155Receiver[addr_] = v_;
    }

    function setReceiverAll(address addr_, bool v_) external onlyGuardian {
        _erc721Receiver[addr_] = v_;
        _erc1155Receiver[addr_] = v_;
    }

    function setNFTReceiveCheck(bool disable721_, bool disable1155_) external onlyGuardian {
        disableERC721ReceiveCheck = disable721_;
        disableERC1155ReceiveCheck = disable1155_;
    }

    function setLevelUpV4(
        uint256[] memory lvs_, 
        uint256[] memory countV1_, 
        uint256[] memory countV2_, 
        uint256[] memory countV3_, 
        uint256[] memory countV4self_,
        uint256[] memory levelV4_
    ) external onlyGuardian {
        require(lvs_.length == countV1_.length && lvs_.length == countV2_.length, "invalid param");
        require(lvs_.length == countV3_.length && lvs_.length == countV4self_.length, "invalid param");
        uint256 level;
        for (uint256 i = 0; i < lvs_.length; ++i) {
            level = lvs_[i];
            require(level > 0 && level <= levelMaxV4, "invalid prototype");
            uint256 cfgVal = countV1_[i] + (countV2_[i] << 32) + (countV3_[i] << 64) + (countV4self_[i] << 96) + (levelV4_[i] << 128);
            _levelUpV4[level] = cfgVal;
        }
    }

    function setLevelUpV5(
        uint256[] memory lvs_, 
        uint256[] memory countV1_, 
        uint256[] memory countV2_, 
        uint256[] memory countV3_,
        uint256[] memory countV4_, 
        uint256[] memory levelV4_,
        uint256[] memory countV5self_
    ) external onlyGuardian {
        require(lvs_.length == countV1_.length && lvs_.length == countV2_.length && lvs_.length == countV3_.length, "invalid param");
        require(lvs_.length == countV4_.length && lvs_.length == levelV4_.length && lvs_.length == countV5self_.length, "invalid param");
        uint256 level;
        for (uint256 i = 0; i < lvs_.length; ++i) {
            level = lvs_[i];
            require(level > 0 && level <= levelMaxV5, "invalid prototype");
            uint256 cfgVal = countV1_[i] + (countV2_[i] << 32) + (countV3_[i] << 64) + (countV4_[i] << 96) + (levelV4_[i] << 128) + (countV5self_[i] << 160);
            _levelUpV5[level] = cfgVal;
        }
    }

    function setLevelUpV6(
        uint256[] memory lvs_, 
        uint256[] memory countV1_, 
        uint256[] memory countV2_, 
        uint256[] memory countV3_,
        uint256[] memory countV4_, 
        uint256[] memory levelV4_,
        uint256[] memory countV5_
    ) external onlyGuardian {
        require(lvs_.length == countV1_.length && lvs_.length == countV2_.length && lvs_.length == countV3_.length, "invalid param");
        require(lvs_.length == countV4_.length && lvs_.length == levelV4_.length && lvs_.length == countV5_.length, "invalid param");
        uint256 level;
        for (uint256 i = 0; i < lvs_.length; ++i) {
            level = lvs_[i];
            require(level > 0 && level <= levelMaxV6, "invalid prototype");
            uint256 cfgVal = countV1_[i] + (countV2_[i] << 32) + (countV3_[i] << 64) + (countV4_[i] << 96) + (levelV4_[i] << 128) + (countV5_[i] << 160);
            _levelUpV6[level] = cfgVal;
        }
    }

    function getURI(uint256 tokenId_, uint256 prototype_) external view returns(string memory uri) {
        uri = _ipfsUrisSpecial[tokenId_];
        if (bytes(uri).length < 1) {
            uri = _ipfsUrisGeneral[prototype_];
        } 
    }

    function isReceiver721(address addr_) external view returns(bool) {
        return disableERC721ReceiveCheck || _erc721Receiver[addr_];
    }

    function isReceiver1155(address addr_) external view returns(bool) {
        return disableERC1155ReceiveCheck || _erc1155Receiver[addr_];
    }

    function getLevelUpV4(uint256 currentLevel_) 
        external 
        view 
        returns(
            uint256 countV1,
            uint256 countV2,
            uint256 countV3,
            uint256 countV4Self,
            uint256 levelV4
        ) 
    {
        uint256 cfgVal = _levelUpV4[currentLevel_];
        require(cfgVal > 0 && currentLevel_ < levelMaxV4, "level limited");
        countV1 = cfgVal % 0x0100000000;
        countV2 = (cfgVal >> 32) % 0x0100000000;
        countV3 = (cfgVal >> 64) % 0x0100000000;
        countV4Self = (cfgVal >> 96) % 0x0100000000;
        levelV4 = (cfgVal >> 128) % 0x0100000000;
    }

    function getLevelUpV5(uint256 currentLevel_) 
        external 
        view 
        returns(
            uint256 countV1,
            uint256 countV2,
            uint256 countV3,
            uint256 countV4,
            uint256 levelV4,
            uint256 countV5Self
        ) 
    {
        uint256 cfgVal = _levelUpV5[currentLevel_];
        require(cfgVal > 0 && currentLevel_ < levelMaxV5, "level limited");
        countV1 = cfgVal % 0x0100000000;
        countV2 = (cfgVal >> 32) % 0x0100000000;
        countV3 = (cfgVal >> 64) % 0x0100000000;
        countV4 = (cfgVal >> 96) % 0x0100000000;
        levelV4 = (cfgVal >> 128) % 0x0100000000;
        countV5Self = (cfgVal >> 160) % 0x0100000000;
    }

    function getLevelUpV6(uint256 currentLevel_) 
        external 
        view 
        returns(
            uint256 countV1,
            uint256 countV2,
            uint256 countV3,
            uint256 countV4,
            uint256 levelV4,
            uint256 countV5
        ) 
    {
        uint256 cfgVal = _levelUpV6[currentLevel_];
        require(cfgVal > 0 && currentLevel_ < levelMaxV6, "level limited");
        countV1 = cfgVal % 0x0100000000;
        countV2 = (cfgVal >> 32) % 0x0100000000;
        countV3 = (cfgVal >> 64) % 0x0100000000;
        countV4 = (cfgVal >> 96) % 0x0100000000;
        levelV4 = (cfgVal >> 128) % 0x0100000000;
        countV5 = (cfgVal >> 160) % 0x0100000000;
    }
}

Contract Security Audit

Contract ABI

[{"inputs":[{"internalType":"address","name":"_implementation","type":"address"},{"internalType":"address","name":"_admin","type":"address"},{"internalType":"bytes","name":"_data","type":"bytes"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"previousAdmin","type":"address"},{"indexed":false,"internalType":"address","name":"newAdmin","type":"address"}],"name":"AdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"implementation","type":"address"}],"name":"Upgraded","type":"event"},{"stateMutability":"payable","type":"fallback"},{"inputs":[],"name":"admin","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newAdmin","type":"address"}],"name":"changeAdmin","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"implementation","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newImplementation","type":"address"}],"name":"upgradeTo","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newImplementation","type":"address"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"upgradeToAndCall","outputs":[],"stateMutability":"payable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

Deployed ByteCode Sourcemap

34571:208:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;26874:11;:9;:11::i;:::-;34571:208;;26650:11;:9;:11::i;32845:111::-;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;32845:111:0;-1:-1:-1;;;;;32845:111:0;;:::i;33342:299::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;33342:299:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;33342:299:0;;-1:-1:-1;33342:299:0;-1:-1:-1;33342:299:0;:::i;32111:104::-;;;;;;;;;;;;;:::i;:::-;;;;-1:-1:-1;;;;;32111:104:0;;;;;;;;;;;;;;32431:246;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;32431:246:0;-1:-1:-1;;;;;32431:246:0;;:::i;31552:86::-;;;;;;;;;;;;;:::i;26302:105::-;26343:17;:15;:17::i;:::-;26371:28;26381:17;:15;:17::i;:::-;26371:9;:28::i;:::-;26302:105::o;32845:111::-;31008:8;:6;:8::i;:::-;-1:-1:-1;;;;;30994:22:0;:10;-1:-1:-1;;;;;30994:22:0;;30990:100;;;32919:29:::1;32930:17;32919:10;:29::i;:::-;30990:100:::0;;;31067:11;:9;:11::i;:::-;32845:111;:::o;33342:299::-;31008:8;:6;:8::i;:::-;-1:-1:-1;;;;;30994:22:0;:10;-1:-1:-1;;;;;30994:22:0;;30990:100;;;33452:29:::1;33463:17;33452:10;:29::i;:::-;33553:12;33570:17;-1:-1:-1::0;;;;;33570:30:0::1;33601:4;;33570:36;;;;;;;;;;::::0;;::::1;::::0;-1:-1:-1;33570:36:0::1;::::0;-1:-1:-1;33570:36:0;;-1:-1:-1;;33570:36:0;;::::1;::::0;;::::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;33552:54;;;33625:7;33617:16;;;::::0;::::1;;31033:1;30990:100:::0;;;31067:11;:9;:11::i;:::-;33342:299;;;:::o;32111:104::-;32163:7;31008:8;:6;:8::i;:::-;-1:-1:-1;;;;;30994:22:0;:10;-1:-1:-1;;;;;30994:22:0;;30990:100;;;32190:17:::1;:15;:17::i;:::-;32183:24;;30990:100:::0;;;31067:11;:9;:11::i;:::-;32111:104;:::o;32431:246::-;31008:8;:6;:8::i;:::-;-1:-1:-1;;;;;30994:22:0;:10;-1:-1:-1;;;;;30994:22:0;;30990:100;;;-1:-1:-1;;;;;32506:22:0;::::1;32498:93;;;;-1:-1:-1::0;;;32498:93:0::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;32607:32;32620:8;:6;:8::i;:::-;32607:32;::::0;;-1:-1:-1;;;;;32607:32:0;;::::1;::::0;;;;::::1;;::::0;::::1;::::0;;;;;;;;;::::1;32650:19;32660:8;32650:9;:19::i;31552:86::-:0;31595:7;31008:8;:6;:8::i;:::-;-1:-1:-1;;;;;30994:22:0;:10;-1:-1:-1;;;;;30994:22:0;;30990:100;;;31622:8:::1;:6;:8::i;34355:207::-:0;34441:8;:6;:8::i;:::-;-1:-1:-1;;;;;34427:22:0;:10;-1:-1:-1;;;;;34427:22:0;;;34419:101;;;;-1:-1:-1;;;34419:101:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;34531:23;:21;:23::i;28603:248::-;28453:66;28822:11;;28799:45::o;24902:907::-;25294:14;25291:1;25288;25275:34;25512:1;25509;25493:14;25490:1;25474:14;25467:5;25454:60;25591:16;25588:1;25585;25570:38;25631:6;25700:38;;;;25772:16;25769:1;25762:27;25700:38;25719:16;25716:1;25709:27;33707:219;30747:66;33897:11;;33875:44::o;28978:155::-;29045:37;29064:17;29045:18;:37::i;:::-;29098:27;;-1:-1:-1;;;;;29098:27:0;;;;;;;;28978:155;:::o;34013:216::-;30747:66;34189:22;34174:48::o;29229:361::-;29311:29;29322:17;29311:10;:29::i;:::-;29303:96;;;;-1:-1:-1;;;29303:96:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;28453:66;29541:31;29526:57::o;29598:231::-;29774:20;29813:8;;;29598:231::o

Swarm Source

ipfs://fffa4bb62eef170445d21cdf39ed676af1fa38a602269f80082784ff883f4adb
Block Transaction Gas Used Reward
Age Block Fee Address BC Fee Address Voting Power Jailed Incoming
Block Uncle Number Difficulty Gas Used Reward
Loading
Loading
Make sure to use the "Vote Down" button for any spammy posts, and the "Vote Up" for interesting conversations.