Contract 0xB761CDEb75746345c398b394A3E88443d368cC6C

 

Contract Overview

Balance:
0 BNB

BNB Value:
$0.00

Token:
Txn Hash Method
Block
From
To
Value [Txn Fee]
0x1ce957ef37cf50e81183fead6bfc00c6f65d9f28fb0864671caef21ca5e3dd9dRelease User Sha...81612642021-06-10 0:36:16138 days 14 hrs ago0x9b6c1c27eb61cd387cb650dd92881de8cf5919d4 IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.000222885
0x8b37701d2c965c836692eb0a89affd2f3cda6dd1762a59704d242172e2139c25Release User Sha...71265472021-05-04 10:05:28175 days 4 hrs ago0xe7902726f24e258c834d2779162ebe55b7b8c657 IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.000222885
0xb5282ab2277e151f33e254eab45bdbf02144773dcf54abe6104c99b1c0a5444cRelease User Sha...65453162021-04-14 1:33:49195 days 13 hrs ago0x9d756cedaf8c87de86b5e3fa0481cbeb4584e889 IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.00038452
0x48e4bd6cfc1c97ca78589b557919352dfb8bf16283e66ba42d8a81590d06505cRelease User Sha...65176452021-04-13 2:29:45196 days 12 hrs ago0x0dcd4993f3f57303cf6f84f7341abfd56a3befe6 IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.000297885
0x6bd59f5d922104d57cd600634d86f4d2a0911484415ea28c3f16d7c4ac574c23Release User Sha...64910552021-04-12 4:17:42197 days 10 hrs ago0xf7f31f66c8e3841f292ded518846856a61a5b0d1 IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.000222885
0xcf12be5642fb1c7aa1552371188108eaa6cab19aea43fe86811d66d68facec4eRelease User Sha...64735122021-04-11 13:39:54198 days 1 hr ago0xc9ed3ca26b5f68147ba942b3f9ff23348c7bad3c IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.000297885
0x8189dd4ce5b092a8b860ea49b925bfc5e4d5a6af29a89eb012eeab0a43e449dbSet Router64676412021-04-11 8:46:21198 days 6 hrs agoProxima: Deployer IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.00014217
0x79a846da255d96af416a4673290d54303577b9fc8426b1a7cbf9361146fd261bRelease User Sha...64642782021-04-11 5:56:20198 days 8 hrs ago0x15c40e34112be998c1c9fe3f6127740ac3ab4a42 IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.000222885
0xa4e2a9abdcf4a5d98ba8ba2b429786095576f548becf93ccc06c4d4f577b4699Release User Sha...64320112021-04-10 3:01:16199 days 11 hrs ago0x2a1d82f5242064330bac450c2305cb1d6cb6e2b2 IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.000222885
0xf142998de6fef2f9da77bff5c878a1efab870c49cf195e04be45d067da214f5dRelease User Sha...64219142021-04-09 18:36:24199 days 20 hrs ago0x0b779b21530889cb9927a1e46d03d7770cc8c9bb IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.000222885
0xf51b736cd1919b063c44a825988dd274e20fb915e9ceb8b3fa8769ea398acb7dRelease User Sha...63952782021-04-08 20:11:22200 days 18 hrs ago0x805c146153ec9e477e506142bacdf3cbcb7a30a5 IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.000222885
0x55ef48d0195305ef05cee1b8eb8904c0186e3fec87c26c664a0b7b815029e6ccRelease User Sha...63580942021-04-07 11:56:04202 days 2 hrs ago0x7236670807fc16ff771c0ea5a776b27c5edd2168 IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.000222885
0x9d92f13ad1d17883fc5a8198cdb758d0c3eedde1a388c7eec0f99150d8a0fb70Release User Sha...63517202021-04-07 6:26:46202 days 8 hrs ago0xdf4c675819651741a323fe805372d479deb545a5 IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.00044577
0x6a48b03e54e768eb5bcb1c04f074e2f978c4b9189820a80e0b13312d78aef93dRelease User Sha...63445552021-04-07 0:16:53202 days 14 hrs ago0x7ee0288afa4aab4028568a6b37fc852bfdc8b956 IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.00091904
0x1445a318d96c253db9bae2e9b5d93dd315299426fe65bfbb3d6342ad60644c26Release User Sha...63204192021-04-06 3:42:01203 days 11 hrs ago0xc12a8f9b1fd05b1786a6dc6f2a3991927ed49a72 IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.00044577
0xbecb8d284848bd9f0d0786ee65d4450c371b9d78511501472f8fc969b1300720Release User Sha...63195852021-04-06 2:59:28203 days 11 hrs ago0x1d98defdce7a73dff4f4c1f328c2f192b4803142 IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.00044577
0xde6cde55272de3c49731ac93fe42db8d130ada343dbb0bc2f450b7ad812da0a3Release User Sha...62352192021-04-03 3:36:25206 days 11 hrs ago0x7ee0288afa4aab4028568a6b37fc852bfdc8b956 IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.00091904
0x5f4483f44f48a4106695b5ca67566f2060730f3dcb068d8d6bcbf74347772c80Release User Sha...62003042021-04-01 22:11:54207 days 16 hrs ago0x8afda4d47a4fcd8731733ba59c59090d5df0e15b IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.00044577
0xc2478a6d0e74cacdd1f945cbbb90f141cd11f7be69336f7496eca02e1207f211Release User Sha...61998822021-04-01 21:50:48207 days 16 hrs ago0x127287790e6edc8b84c48a5cbbda99500d0e9436 IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.000297885
0xa1116a8f01c77bd69e94ea1417222053621bbd5688e4521c9686512cd95c3c2fRelease User Sha...61645222021-03-31 16:12:33208 days 22 hrs ago0x03a089ccaad6ecfecb789a234d152b7b58d0869a IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.00059577
0x62bd89899296a13d0daff111676148a930fb8438485988ebded509d6ce62fb0cRelease User Sha...61642212021-03-31 15:57:30208 days 22 hrs ago0x2a1d82f5242064330bac450c2305cb1d6cb6e2b2 IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.00044577
0x66706aa7dd523f355791d8d3a0d7edf854a7809a1d0c23794fbec52bbb52b460Release User Sha...61569662021-03-31 9:45:40209 days 5 hrs ago0xa1562071beebf0d778312263d0936c707e12964a IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.00044577
0xef7cfbca55c84720f7d1c5a7968ab6bbaafed5311abd1557843b36f82ca94bdcRelease User Sha...61504032021-03-31 4:16:38209 days 10 hrs ago0x2a1d82f5242064330bac450c2305cb1d6cb6e2b2 IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.00044577
0x022598054e57c8fdec1f1ca3ada28087f82cd2afe96a607ee2d8e3cfb96910e1Release User Sha...61501582021-03-31 4:04:23209 days 10 hrs ago0x1070a1c515cb92df79561a806e0e77d12c9c5aab IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.00044577
0x8fb55e9bfa35416fb13f48ffca4cf5c216a8afa8be11c13d6ac53f10c50a20c8Release User Sha...61379272021-03-30 17:51:13209 days 20 hrs ago0x7ee0288afa4aab4028568a6b37fc852bfdc8b956 IN  0xb761cdeb75746345c398b394a3e88443d368cc6c0 BNB0.00091904
[ Download CSV Export 
Parent Txn Hash Block From To Value
Loading

Contract Source Code Verified (Exact Match)

Contract Name:
ProximaLiquidityRewardVault

Compiler Version
v0.6.12+commit.27d51765

Optimization Enabled:
Yes with 200 runs

Other Settings:
default evmVersion

Contract Source Code (Solidity Standard Json-Input format)

File 1 of 5 : ProximaLiquidityRewardVault.sol
// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";

interface IFactory {
    function getPair(address tokenA, address tokenB)
        external
        view
        returns (address pair);
}

/**
 * @title : ProximaLiquidityRewardVault
 * Developed by ProximusAlpha
 */

contract ProximaLiquidityRewardVault {
    using SafeMath for uint256;
    /// @dev Proxima Token
    IERC20 public pxa;
    /// @dev Proxima Governor
    address public governance;
    /// @dev Proxima Router
    address public router;
    /// @dev Proxima Factory
    address public factory;
    /// @dev Proxima developer
    address public setter;
    /// @dev Pending pxa rewards
    uint256 private totalPendingRewards;
    /// @dev div const
    uint256 private denominator = 10000000;

    /// @dev Event emitted when new rewards are locked
    event rewardLocked(address[] pairs, address user, uint256 totalLocked);
    /// @dev Event emitted when LP retrieves rewards via pair
    event pairRewardClaim(address releasedTo, uint256 releasedAmount);
    /// @dev Event emitted when user withdraw rewards
    event userRewardClaim(address indexed releasedTo, uint256 releasedAmount);

    /// @dev Whitelist map
    mapping(address => bool) public whiteListedPairs;
    /// @dev Pair pending rewardmap
    mapping(address => uint256) public pairPendingRewards;
    /// @dev User pending reward map
    mapping(address => uint256) public userPendingRewards;

    /// @dev Governance modifier
    modifier onlyGovernance() {
        require(msg.sender == governance, "PLRV: Not governance ");
        _;
    }
    /// @dev Router modifier
    modifier onlyRouter() {
        require(msg.sender == router, "PLRV: Not router ");
        _;
    }

    /// @dev Sets mandate
    constructor(IERC20 _pxa, address _setter) public {
        pxa = _pxa;
        setter = _setter;
        totalPendingRewards = 0;
    }

    /// @dev Locks trade rewards for user and LP of pair(s)
    function lockShares(address[] memory pairs, address _who)
        external
        onlyRouter
        returns (bool)
    {
        uint256 totalPairAllocation = 0;

        for (uint8 i = 0; i < pairs.length - 1; i++) {
            address forPair = IFactory(factory).getPair(pairs[i], pairs[i + 1]);
            if (whiteListedPairs[forPair] == true) {
                uint256 pairShare = getCurrentDistribution();
                totalPairAllocation = totalPairAllocation.add(pairShare);
                totalPendingRewards = totalPendingRewards.add(pairShare);
                pairPendingRewards[forPair] = pairPendingRewards[forPair].add(
                    pairShare
                );
            }
        }
        if (totalPairAllocation > 0) {
            uint256 userShare = totalPairAllocation.div(pairs.length);
            if (pairs.length <= 2) {
                userShare = userShare.div(2); // direct pair trade reward correction
            }
            totalPendingRewards = totalPendingRewards.add(userShare);
            userPendingRewards[_who] = userPendingRewards[_who].add(userShare);
            totalPairAllocation = totalPairAllocation.add(userShare);
        }
        emit rewardLocked(pairs, _who, totalPairAllocation);
        return true;
    }

    /// @dev Release accu. rewards for pair
    function releasePairShare() external returns (bool) {
        uint256 pairShare = pairPendingRewards[msg.sender];
        require(pairShare > 0, "PLRV: No pending rewards");
        pairPendingRewards[msg.sender] = 0;
        safePxaTransfer(msg.sender, pairShare);
        totalPendingRewards = totalPendingRewards.sub(pairShare);
        emit pairRewardClaim(msg.sender, pairShare);
        return true;
    }

    /// @dev Release accu. rewards for user
    function releaseUserShare() external returns (bool) {
        uint256 userShare = userPendingRewards[msg.sender];
        require(userShare > 0, "PLRV: No pending rewards");
        userPendingRewards[msg.sender] = 0;
        safePxaTransfer(msg.sender, userShare);
        totalPendingRewards = totalPendingRewards.sub(userShare);
        emit userRewardClaim(msg.sender, userShare);
        return true;
    }

    /// @dev Sets governance on pair
    function applyGovernance(address pair, bool sentiment)
        external
        onlyGovernance
        returns (bool)
    {
        uint256 pairShare = pairPendingRewards[pair];
        if (pairShare > 0) {
            pairPendingRewards[pair] = 0;
            safePxaTransfer(pair, pairShare);
            totalPendingRewards = totalPendingRewards.sub(pairShare);
        }
        if (sentiment) {
            return sewPairSupply(pair);
        } else {
            return slashPairSupply(pair);
        }
    }

    function sewPairSupply(address pair) internal returns (bool) {
        whiteListedPairs[pair] = true;
        return true;
    }

    function slashPairSupply(address pair) internal returns (bool) {
        whiteListedPairs[pair] = false;
        return true; /// @dev Release accu. rewards for pair
    }

    /// @dev Whilelist pairs directly
    function exemptedPair(address _pair) external returns (bool) {
        require(msg.sender == factory, "PLRV : FORBIDDEN");
        return sewPairSupply(_pair);
    }

    /// @dev Safe pxa token transfer
    function safePxaTransfer(address _to, uint256 _amount) internal {
        uint256 PxaBal = safeBalance();
        if (_amount > PxaBal) {
            pxa.transfer(_to, PxaBal);
        } else {
            pxa.transfer(_to, _amount);
        }
    }

    /// @dev Returns current reward distribution . Calculated by x percent of reward pools total weight
    function getCurrentDistribution() public view returns (uint256) {
        uint256 safeAmount = (safeBalance()).sub(totalPendingRewards);
        uint256 numerator = safeAmount.mul(8);
        uint256 share = numerator / denominator;
        return (share);
    }

    /// @dev Returns rewardVault balance
    function safeBalance() public view returns (uint256) {
        return pxa.balanceOf(address(this));
    }

    /// @dev Ruturns user pending rewards
    function getUserPendingShares(address _who)
        external
        view
        returns (uint256)
    {
        return userPendingRewards[_who];
    }

    /// @dev Returns Pair pending rewards
    function getPairPendingShares(address _who)
        external
        view
        returns (uint256)
    {
        return pairPendingRewards[_who];
    }

    /// @dev Sets Governance
    function setPairGovernor(address _governance) external {
        require(msg.sender == setter, "PLRV: FORBIDDEN");
        governance = _governance;
    }

    /// @dev Sets proxima developer address
    function setSetter(address _setter) external {
        require(msg.sender == setter, "PLRV: FORBIDDEN");
        setter = _setter;
    }

    /// @dev Sets Proxima router
    function setRouter(address _router) external {
        require(msg.sender == setter, "PLRV: FORBIDDEN");
        router = _router;
    }

    /// @dev Sets Proxima factory
    function setFactory(address _factory) external {
        require(msg.sender == setter, "PLRV: FORBIDDEN");
        factory = _factory;
    }
}

File 2 of 5 : SafeMath.sol
// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

File 3 of 5 : ERC20.sol
// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../../utils/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_) public {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal virtual {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

File 4 of 5 : IERC20.sol
// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

File 5 of 5 : Context.sol
// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

Settings
{
  "remappings": [],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  }
}

Contract Security Audit

Contract ABI

[{"inputs":[{"internalType":"contract IERC20","name":"_pxa","type":"address"},{"internalType":"address","name":"_setter","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"releasedTo","type":"address"},{"indexed":false,"internalType":"uint256","name":"releasedAmount","type":"uint256"}],"name":"pairRewardClaim","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address[]","name":"pairs","type":"address[]"},{"indexed":false,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"totalLocked","type":"uint256"}],"name":"rewardLocked","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"releasedTo","type":"address"},{"indexed":false,"internalType":"uint256","name":"releasedAmount","type":"uint256"}],"name":"userRewardClaim","type":"event"},{"inputs":[{"internalType":"address","name":"pair","type":"address"},{"internalType":"bool","name":"sentiment","type":"bool"}],"name":"applyGovernance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_pair","type":"address"}],"name":"exemptedPair","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"factory","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getCurrentDistribution","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_who","type":"address"}],"name":"getPairPendingShares","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_who","type":"address"}],"name":"getUserPendingShares","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"governance","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address[]","name":"pairs","type":"address[]"},{"internalType":"address","name":"_who","type":"address"}],"name":"lockShares","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"pairPendingRewards","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pxa","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"releasePairShare","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"releaseUserShare","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"router","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"safeBalance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_factory","type":"address"}],"name":"setFactory","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_governance","type":"address"}],"name":"setPairGovernor","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_router","type":"address"}],"name":"setRouter","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_setter","type":"address"}],"name":"setSetter","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"setter","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"userPendingRewards","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"whiteListedPairs","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"}]

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

Constructor Arguments (ABI-Encoded and is the last bytes of the Contract Creation Code above)

000000000000000000000000086b098699a219903f5a7df526ba2874f1637f30000000000000000000000000690a4f012c626339083c5a920e3f767152737316

-----Decoded View---------------
Arg [0] : _pxa (address): 0x086b098699a219903f5a7df526ba2874f1637f30
Arg [1] : _setter (address): 0x690a4f012c626339083c5a920e3f767152737316

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 000000000000000000000000086b098699a219903f5a7df526ba2874f1637f30
Arg [1] : 000000000000000000000000690a4f012c626339083c5a920e3f767152737316


Block Transaction Gas Used Reward
Age Block Fee Address BC Fee Address Voting Power Jailed Incoming
Block Uncle Number Difficulty Gas Used Reward
Loading
Loading
Make sure to use the "Vote Down" button for any spammy posts, and the "Vote Up" for interesting conversations.