Contract 0x94F559aE621F1c810F31a6a620Ad7376776fe09E 2

 
Txn Hash Method
Block
From
To
Value [Txn Fee]
0x63805cb1b68ac9fda384e92dbdfeb7577cfad1056e2757acc23a3fe284c4cb74Approve121076122021-10-26 13:02:032 hrs 48 mins ago0xc467a922f6dd69a7cbfaa0bd1d837a697c2adb4f IN  Soup Protocol: SOUP Token0 BNB0.000222255
0xa9694687b5772767b318ccd8f5afb72307b62efb471e88d6681f5ae77319a793Approve120492452021-10-24 11:54:282 days 3 hrs ago0x614146018042d47dcde01a9400a8d14343047b67 IN  Soup Protocol: SOUP Token0 BNB0.000222255
0x88e086ae87dbe63e6a8c62f191463753460ac48d2475d3cabff2df4688681a5eApprove120291802021-10-23 19:05:162 days 20 hrs ago0xbee34dd58ed7baacd947456398d673ed33b2e38f IN  Soup Protocol: SOUP Token0 BNB0.00007267
0xdabdd494cd27e768ac87cabc4b5b2f5f16e725b37d85087e793ac61b502024c8Approve120291742021-10-23 19:04:582 days 20 hrs ago0xbee34dd58ed7baacd947456398d673ed33b2e38f IN  Soup Protocol: SOUP Token0 BNB0.00007267
0x246ea2b3c6e1174370db5b0c074dda3f59a5c830655183f993689a8b8ab374eaApprove119712782021-10-21 18:06:074 days 21 hrs ago0x53199dfb8c98817b20cd44436aae022716d380f5 IN  Soup Protocol: SOUP Token0 BNB0.00007267
0x19fb08dd64dd43b459e71160667861e6e81fa1c63f9c8c57b2a6ab6a743e6cc7Approve119712302021-10-21 18:03:434 days 21 hrs ago0x53199dfb8c98817b20cd44436aae022716d380f5 IN  Soup Protocol: SOUP Token0 BNB0.00007267
0x665ee715210b7b4c89176a0274c76e06e225d6aa7d37f624b60d0081ac59d0bcApprove118743352021-10-18 7:59:088 days 7 hrs ago0xd9dc13f3286c15eba48ff55e9f39020a6b1a8591 IN  Soup Protocol: SOUP Token0 BNB0.00088902
0xeaccfea9540c9697f67b17ab44d4a6d8000e6c21822bcb08017527aee31835ceApprove118478142021-10-17 9:44:009 days 6 hrs ago0x96abebf759517eb856b938ffea8d46be53414b8f IN  Soup Protocol: SOUP Token0 BNB0.000101738
0xef4fec26c3d739890f303bb27497ec8a1e884ae9dc38f561da3d45353815de61Approve117995502021-10-15 17:20:2410 days 22 hrs ago0xea5dc4894f0a67853f52a79f079d06b81ae7daa4 IN  Soup Protocol: SOUP Token0 BNB0.00007267
0x6e37849cf85ea4c669b6b056a19c55732fb83e70399332b1c516335851fe6fceApprove117587932021-10-14 7:16:3212 days 8 hrs ago0x5195992be055bdbd59766dfc049b7a67e804beaa IN  Soup Protocol: SOUP Token0 BNB0.00007267
0xf6aa576396f0c47c3455bd847a63d7a122cc55d14a5063033c08e6c661fff50bApprove117205542021-10-12 22:54:3513 days 16 hrs ago0xbff7962dfcd458e130e9b297d43c421b609e9d3f IN  Soup Protocol: SOUP Token0 BNB0.00007267
0x072c83323808c3251302721cbae91fb9cabc2c39f67da1be04bada3d3186dc60Approve117148352021-10-12 18:08:0613 days 21 hrs ago0xa97e9adc67c4c102cf415e1fac047768337be5c0 IN  Soup Protocol: SOUP Token0 BNB0.00007267
0x4ec39cc83ac04246ea50c421aad1069ae5b4eeed577987f78ec7747656c2b402Approve116867222021-10-11 18:26:0614 days 21 hrs ago0xffa5457c3b8248d6099ecfb07012218be348de48 IN  Soup Protocol: SOUP Token0 BNB0.00007267
0xac58d51b4096ec8bd8064b45eb39d6683de4bec4a70d681fdd3f0aee8ce47ddbApprove116832042021-10-11 14:59:2215 days 50 mins ago0x0dd7fe601593947f54d084f1fd2892064044e6d8 IN  Soup Protocol: SOUP Token0 BNB0.00007267
0x1442675e440903fcf6a022db57f8d2f6ea8bbb8ad1b96c3bdf6358859a1ba5afApprove116831542021-10-11 14:56:5215 days 53 mins ago0x0dd7fe601593947f54d084f1fd2892064044e6d8 IN  Soup Protocol: SOUP Token0 BNB0.00007267
0x11396d8fa0b7cfc931d85c78402621ead5a5892a9d9c1908cf7f29c4b65b3f59Approve116830862021-10-11 14:53:2815 days 56 mins ago0x0dd7fe601593947f54d084f1fd2892064044e6d8 IN  Soup Protocol: SOUP Token0 BNB0.00007267
0xd5ec143ba928ac3778412d8329ee768d356265a293a8115d912aa807407478deApprove116808392021-10-11 13:00:5215 days 2 hrs ago0x88156124d29026918031d01548a59cee51a42d1b IN  Soup Protocol: SOUP Token0 BNB0.000101738
0x4f09ffb03c5e845c86589c4cbb42b5bf7346686ad0ad42a983378c4bcdc453e4Approve116808352021-10-11 13:00:4015 days 2 hrs ago0x88156124d29026918031d01548a59cee51a42d1b IN  Soup Protocol: SOUP Token0 BNB0.000101738
0xd5bfe98f679df5317bee87fc767941299943e79df34cf4962983fab0ee0918a4Approve116808302021-10-11 13:00:2515 days 2 hrs ago0x88156124d29026918031d01548a59cee51a42d1b IN  Soup Protocol: SOUP Token0 BNB0.000101738
0x018d459d7a161cafb2fcc72a8a0601e128b3cf81b7c794dc0956dacdf644f05eApprove116808242021-10-11 13:00:0715 days 2 hrs ago0x88156124d29026918031d01548a59cee51a42d1b IN  Soup Protocol: SOUP Token0 BNB0.000101738
0x4a4a6ac62df210bfa4a0d414a1f4677767931d0fa8c876e40a2648bd55de6789Approve116808182021-10-11 12:59:4915 days 2 hrs ago0x88156124d29026918031d01548a59cee51a42d1b IN  Soup Protocol: SOUP Token0 BNB0.000101738
0xbb1d22624cc258a5051c33e2d23cbb3e78a796c271d291c462493011fdaa6079Approve116808142021-10-11 12:59:3715 days 2 hrs ago0x88156124d29026918031d01548a59cee51a42d1b IN  Soup Protocol: SOUP Token0 BNB0.000101738
0xde52d1ef1d2f81f9dc406a15cc0adfbbf9bd22c9800fd787c203889e74adb5d2Approve116375242021-10-10 0:47:1916 days 15 hrs ago0x529a9c1a86beadd9b55713f50268e67db3cfc964 IN  Soup Protocol: SOUP Token0 BNB0.000087204
0xe513392e3625b767db35f892dd18bf99761927657257cb6670c4bc456849b9b9Approve116163102021-10-09 7:03:5617 days 8 hrs ago0x2a57536f27cdb6a5e412442d6937ae0d481e5413 IN  Soup Protocol: SOUP Token0 BNB0.00088902
0x0cb8498235012f6dfc2c1a3bcfb1d313784580415ef1fcc6641cd48b3b8a1ef6Approve115989062021-10-08 16:29:2117 days 23 hrs ago0x68b14afa82a31ffda2b95d81783354ea04f49786 IN  Soup Protocol: SOUP Token0 BNB0.000222255
[ Download CSV Export 

OVERVIEW

SOUP token can be utilised for trading and also can be used to interact with Soup Protocol's upcoming games such as Soup3D.

Latest 25 internal transaction
Parent Txn Hash Block From To Value
0xba6ac248c44c9293cc81d513a075c06d724a292f3195fd8c3292c62d2e0b210d54713272021-03-07 11:59:18233 days 3 hrs ago PancakeSwap: SOUP 6 Soup Protocol: SOUP Token0 BNB
0xba6ac248c44c9293cc81d513a075c06d724a292f3195fd8c3292c62d2e0b210d54713272021-03-07 11:59:18233 days 3 hrs ago PancakeSwap: Router Soup Protocol: SOUP Token0 BNB
0x767c0fb2bfd9b8556acb28eba5bf9eed7ad3f90492a7bf40c83a66a5fdfc4b0754713112021-03-07 11:58:30233 days 3 hrs ago 0x74ee3b0c391a2190d4fc275cd6c9e9c8dc109240 Soup Protocol: SOUP Token0 BNB
0x724ed10482c6a5401c18511153a926526b9e18598110d58dff0f9e6df36cabdc54713072021-03-07 11:58:18233 days 3 hrs ago PancakeSwap: SOUP 6 Soup Protocol: SOUP Token0 BNB
0x724ed10482c6a5401c18511153a926526b9e18598110d58dff0f9e6df36cabdc54713072021-03-07 11:58:18233 days 3 hrs ago PancakeSwap: Router Soup Protocol: SOUP Token0 BNB
0xe2cc9c053ff16631ac436f13f7974fc2541611506f812db57379e52669d7831154713052021-03-07 11:58:12233 days 3 hrs ago PancakeSwap: Router Soup Protocol: SOUP Token0 BNB
0xe2cc9c053ff16631ac436f13f7974fc2541611506f812db57379e52669d7831154713052021-03-07 11:58:12233 days 3 hrs ago PancakeSwap: SOUP 6 Soup Protocol: SOUP Token0 BNB
0xe2cc9c053ff16631ac436f13f7974fc2541611506f812db57379e52669d7831154713052021-03-07 11:58:12233 days 3 hrs ago PancakeSwap: SOUP 6 Soup Protocol: SOUP Token0 BNB
0xe2cc9c053ff16631ac436f13f7974fc2541611506f812db57379e52669d7831154713052021-03-07 11:58:12233 days 3 hrs ago PancakeSwap: SOUP 6 Soup Protocol: SOUP Token0 BNB
0x839fc5a4d00233bbe61aa9229acfd4e1dbb32e5e03cf06b5c1448b21e063fca254713042021-03-07 11:58:09233 days 3 hrs ago PancakeSwap: SOUP 6 Soup Protocol: SOUP Token0 BNB
0x839fc5a4d00233bbe61aa9229acfd4e1dbb32e5e03cf06b5c1448b21e063fca254713042021-03-07 11:58:09233 days 3 hrs ago PancakeSwap: Router Soup Protocol: SOUP Token0 BNB
0x0e29cba387c501ac1e3064bc13a7afcd8865e74d2aa2c750a95e9e3de72c6e8254712952021-03-07 11:57:42233 days 3 hrs ago PancakeSwap: SOUP 6 Soup Protocol: SOUP Token0 BNB
0x0e29cba387c501ac1e3064bc13a7afcd8865e74d2aa2c750a95e9e3de72c6e8254712952021-03-07 11:57:42233 days 3 hrs ago PancakeSwap: Router Soup Protocol: SOUP Token0 BNB
0x35a806a6b6d87ef9ed7a34c07404449b4e30477473126a1dbeddd1557a0dcc3654712882021-03-07 11:57:21233 days 3 hrs ago PancakeSwap: Router Soup Protocol: SOUP Token0 BNB
0x35a806a6b6d87ef9ed7a34c07404449b4e30477473126a1dbeddd1557a0dcc3654712882021-03-07 11:57:21233 days 3 hrs ago PancakeSwap: SOUP 6 Soup Protocol: SOUP Token0 BNB
0x35a806a6b6d87ef9ed7a34c07404449b4e30477473126a1dbeddd1557a0dcc3654712882021-03-07 11:57:21233 days 3 hrs ago PancakeSwap: SOUP 6 Soup Protocol: SOUP Token0 BNB
0x35a806a6b6d87ef9ed7a34c07404449b4e30477473126a1dbeddd1557a0dcc3654712882021-03-07 11:57:21233 days 3 hrs ago PancakeSwap: SOUP 6 Soup Protocol: SOUP Token0 BNB
0xfdb9b01779ab5323d537fd213cfc85222f199e826bbc1c24363b5825ff18610554712652021-03-07 11:56:12233 days 3 hrs ago 0x74ee3b0c391a2190d4fc275cd6c9e9c8dc109240 Soup Protocol: SOUP Token0 BNB
0x8212552c13dce5763b36879743a0173d877e7bb7a1c8c548d072964afe8596ff54712612021-03-07 11:56:00233 days 3 hrs ago PancakeSwap: SOUP 6 Soup Protocol: SOUP Token0 BNB
0x8212552c13dce5763b36879743a0173d877e7bb7a1c8c548d072964afe8596ff54712612021-03-07 11:56:00233 days 3 hrs ago PancakeSwap: Router Soup Protocol: SOUP Token0 BNB
0x22fb213463d8424b6f700db9af0f7c0975b6386734bbcc22cb682bf56e89403654712552021-03-07 11:55:42233 days 3 hrs ago PancakeSwap: SOUP 6 Soup Protocol: SOUP Token0 BNB
0x22fb213463d8424b6f700db9af0f7c0975b6386734bbcc22cb682bf56e89403654712552021-03-07 11:55:42233 days 3 hrs ago PancakeSwap: SOUP 6 Soup Protocol: SOUP Token0 BNB
0x7888e45ffb7aa8aa23e73a9fb743128b94d1533b6274c640aa81e1f50f09b1ef54712502021-03-07 11:55:27233 days 3 hrs ago PancakeSwap: SOUP 6 Soup Protocol: SOUP Token0 BNB
0x7888e45ffb7aa8aa23e73a9fb743128b94d1533b6274c640aa81e1f50f09b1ef54712502021-03-07 11:55:27233 days 3 hrs ago PancakeSwap: Router Soup Protocol: SOUP Token0 BNB
0xa76aef2ca61b54297829d04abb0b7846a77fbf2a498544ecdc75518a59fd738554712462021-03-07 11:55:15233 days 3 hrs ago PancakeSwap: SOUP 6 Soup Protocol: SOUP Token0 BNB
[ Download CSV Export 
Loading

Contract Source Code Verified (Similar Match)
Note: This contract matches the deployed ByteCode of the Source Code for Contract 0x7F1C57f82FCb11BE8ACB0e9f793A4a37D5660bED

Contract Name:
Dollar

Compiler Version
v0.6.12+commit.27d51765

Optimization Enabled:
Yes with 9999 runs

Other Settings:
default evmVersion
File 1 of 9 : Dollar.sol
// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/token/ERC20/ERC20Burnable.sol";

import "./owner/Operator.sol";

contract Dollar is ERC20Burnable, Operator {
    uint256 public constant INITIAL_DISTRIBUTION = 1100 ether;

    bool public rewardPoolDistributed = false;

    /**
     * @notice Constructs the Soup ERC-20 contract.
     */
    constructor() public ERC20("Soup", "SOUP") {
        // Mints 1 Soup to contract creator for initial pool setup
        _mint(msg.sender, 1 ether);
    }

    /**
     * @notice Operator mints basis dollar to a recipient
     * @param recipient_ The address of recipient
     * @param amount_ The amount of basis dollar to mint to
     * @return whether the process has been done
     */
    function mint(address recipient_, uint256 amount_) public onlyOperator returns (bool) {
        uint256 balanceBefore = balanceOf(recipient_);
        _mint(recipient_, amount_);
        uint256 balanceAfter = balanceOf(recipient_);

        return balanceAfter > balanceBefore;
    }

    function burn(uint256 amount) public override {
        super.burn(amount);
    }

    function burnFrom(address account, uint256 amount) public override onlyOperator {
        super.burnFrom(account, amount);
    }

    /**
     * @notice distribute to reward pool (only once)
     */
    function distributeReward(address _distributionPool) external onlyOperator {
        require(!rewardPoolDistributed, "only can distribute once");
        require(_distributionPool != address(0), "!_distributionPool");
        rewardPoolDistributed = true;
        _mint(_distributionPool, INITIAL_DISTRIBUTION);
    }

    function governanceRecoverUnsupported(IERC20 _token, uint256 _amount, address _to) external onlyOperator {
        _token.transfer(_to, _amount);
    }
}

File 2 of 9 : ERC20Burnable.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

import "../../GSN/Context.sol";
import "./ERC20.sol";

/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, deducting from the caller's
     * allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `amount`.
     */
    function burnFrom(address account, uint256 amount) public virtual {
        uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");

        _approve(account, _msgSender(), decreasedAllowance);
        _burn(account, amount);
    }
}

File 3 of 9 : Operator.sol
// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/GSN/Context.sol";
import "@openzeppelin/contracts/access/Ownable.sol";

contract Operator is Context, Ownable {
    address private _operator;

    event OperatorTransferred(address indexed previousOperator, address indexed newOperator);

    constructor() internal {
        _operator = _msgSender();
        emit OperatorTransferred(address(0), _operator);
    }

    function operator() public view returns (address) {
        return _operator;
    }

    modifier onlyOperator() {
        require(_operator == msg.sender, "operator: caller is not the operator");
        _;
    }

    function isOperator() public view returns (bool) {
        return _msgSender() == _operator;
    }

    function transferOperator(address newOperator_) public onlyOwner {
        _transferOperator(newOperator_);
    }

    function _transferOperator(address newOperator_) internal {
        require(newOperator_ != address(0), "operator: zero address given for new operator");
        emit OperatorTransferred(address(0), newOperator_);
        _operator = newOperator_;
    }
}

File 4 of 9 : Context.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

File 5 of 9 : ERC20.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

import "../../GSN/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    using Address for address;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

File 6 of 9 : IERC20.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

File 7 of 9 : SafeMath.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

File 8 of 9 : Address.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies in extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

File 9 of 9 : Ownable.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

import "../GSN/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

Settings
{
  "optimizer": {
    "enabled": true,
    "runs": 9999
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  },
  "libraries": {}
}

Contract Security Audit

Contract ABI

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOperator","type":"address"},{"indexed":true,"internalType":"address","name":"newOperator","type":"address"}],"name":"OperatorTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"INITIAL_DISTRIBUTION","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burnFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_distributionPool","type":"address"}],"name":"distributeReward","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"_token","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"},{"internalType":"address","name":"_to","type":"address"}],"name":"governanceRecoverUnsupported","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"isOperator","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient_","type":"address"},{"internalType":"uint256","name":"amount_","type":"uint256"}],"name":"mint","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"operator","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"rewardPoolDistributed","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOperator_","type":"address"}],"name":"transferOperator","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

Block Transaction Gas Used Reward
Age Block Fee Address BC Fee Address Voting Power Jailed Incoming
Block Uncle Number Difficulty Gas Used Reward
Loading
Loading
Make sure to use the "Vote Down" button for any spammy posts, and the "Vote Up" for interesting conversations.